Model C Cleated Incline Belt
Conveyor
 View
Catalog
Sheet  Download
Catalog
Sheet
The
Model C handles bags, boxes, cartons, and parts. It may be set
at any angle from horizontal to 45° for various uses,
including floor-to-floor conveying and the transportation of
materials from building to truck or box car.
|
 |
- Bed - 6-5/8" deep x 12 ga. formed bed powder
painted. Standard sections come in lengths of 6', 8',
& 10'
- Belt - hardwood cleats spaced every 60". Conveyor
can be supplied less cleats
- Overall Widths: 20", 24", & 30"
- Motor - 3/4 HP to 2 HP available based on capacity
- Reversible
- Capacity-up to 520 lbs.
|
|
Model RBI/SBI Floor to Floor Incline
Conveyor (Roller Bed/Slider Bed)
Model RBI: View
Catalog Sheet Download
Catalog Sheet
Model SBI: View
Catalog Sheet Download
Catalog
Sheet
The
Model RBI & SBI are floor-to-floor incline conveyors. They
are equipped with a chain driven power feeder and an
adjustable double nose-over at the discharge end to insure a
smooth transfer from incline to horizontal plane. The RBI
conveyor, with rollers, makes higher load capacities possible.
The SBI has full width galvanized pans. Inclines are easily
adjusted up to 30°. These conveyors can also be used as a
booster conveyor in gravity flow systems.
|
| Availability |
| |
24-Hour Stockyard | |
- Bed - 6-1/2" deep x 12 ga. formed steel frame
powder painted. Standard sections come in lengths of
4', 6', 8', & 10'
- Overall Widths: 16", 18", 20", 22", 24", 26", 28", 30", 34", 36", 40", &
42"
- Motor - 3/4 HP-2 HP with brake kit based on load
capacity
- Reversible
- Center Drive (standard)
- Capacity can range up to 1245 lbs.
|
| Model BA Folding Booster Conveyor |
|
|
The Model BA is ideal for stacking, loading and unloading. One lever
control adjusts angle without effort. Desired angle automatically locked
by power screw.
Availability:
|
- Bed - 4" deep x 20" wide x 12 ga. formed steel
bed, which is hinged for storage purposes
- Overall Width - 20"
- Overall Conveyor Lengths: 10', 12', 14', 16', 20', &
22'
- Reversible
- Self-powered Raising Device
- Motor - 3/4 HP (10' to 14')-1 HP (16' to 22')
- Switch - Reversing drum with 20' power cord and plug
- Belt Speed - 65 FPM
- Capacity - 300 lbs. total distributed load, 150 lbs. unit
load
|
The Model PC can be used as a portable or permanent parts conveyor. Side
guards and cleated belt easily catch small stampings, plastic parts,
etc., and carry them to hoppers or drums. Flapper guard prevents parts
from falling through conveyor.
Availability:
|
- Bed - 6-5/8" deep x 12 ga. formed steel bed with
3-1/2" high vertical guards
- Overall Widths: 8", 10", 12",
14", 16",
20", 22",
& 28"
- Belt - 1-1/2" high molded cleats on 12" centers
- Portable base support is tubular steel mounted on 4"
dia. steel wheels. Adjustable to control conveyor height at
top and bottom
- Motor - 1/2 HP - 2 HP (Max)
- Overhead End Drive
- Capacity - 300 lbs. total distributed load
- Belt Speed - 65 FPM
|
| Model PCX Low Profile Parts Conveyor |
|
|
The portable Model PCX parts conveyor can be easily positioned under
punch presses and extruding machines to catch small steel, plastic, or
aluminum stampings, etc. The PCX conveys them quickly up to a hopper or
drum.
 |
- Bed - 7-1/4" deep x 12 ga. formed steel side channel
with bolt-in slider bed which provides 1" high sides
above the belt
- Belt widths: 12", 18", & 24"
- Belt - 1" high steel cleats on 12" centers
- Belt Scraper-mounted inside conveyor bed section to clean
underside of return belt
- Portable Base Support-adjustable from 4" to 30"
- Underside Drive
- Motor - 1/2 HP - 1 HP (Max)
- Belt Speed - 25 FPM
- Capacity - 100 lbs. total distributed load
|
|
Model PCH Piano Hinge Parts
Conveyor
View
Catalog
Sheet Download
Catalog
Sheet
The
Model PCH parts conveyor with hinged steel belt is ideal for
carrying hot, oily parts from punch presses, forging machines,
etc., to drums, hoppers, or other operations. Configurations
range from straight to Z type units.
|
 |
- Bed - 8-5/8" deep x 10 ga. powder painted formed
steel channel.
- Overall Widths: 10-3/8", 12-3/8, 16-3/8", 22-3/8",
& 28-3/8"
- Belt - 12 ga. metal piano hinge
- Motor - 3/4 HP standard, 2 HP available
- Belt Speed - 30 FPM
- Capacity - 35 lbs. per linear foot
|
|
Model PCA Light Duty Parts
Conveyor
View
Catalog
Sheet Download
Catalog
Sheet
The
Model PCH parts conveyor with hinged steel belt is ideal for
carrying hot, oily parts from punch presses, forging machines,
etc., to drums, hoppers, or other operations. Configurations
range from straight to Z type units.
|
 |
- Bed: 12 ga. formed steel troughed bed with 1"
high vertical sides
- Belt Widths: 4", 6", 8", 10", 12", & 18"
- Overhead Drive
- Motor - 1/2 HP
- Belt Speed - 65 FPM
- Capacity - maximum load per linear foot of
conveyor is 10 lbs.
|
|
|
 |
Incline Conveyors