ProSort 131 Shown
The Pro Sort is designed for high speed sorting of
products. Products are transported on flight tubes where
at a predetermined location, divert shoes move
diagonally across the conveyor to physically push the
product onto a take-away line.
|
Model ProSort 131 & 221/231 High
Speed Sortation Conveyor |
|
ProSort
131:
|
View
Sheet |
 Download Sheet |
- Overall Widths: 26", 32", 38", & 44"
- Bed - 14" deep x 1-1/2", 10 & 12 ga.
formed steel frame powder painted
- Air Requirements - 60 p.s.i.
- Motor - 230/460V-3Ph. 60HZ. HP based on
speed and length requirements
- Capacity - Maximum load 25 lbs. per foot.
Maximum unit load 50 lbs.
|
ProSort
221/231: |
View
Sheet |
Download
Sheet |
- Overall Widths: 33", 39", 45", 51", &
57"
- Bed - 17"deep x 1-1/2", 10, & 12 ga.
formed steel frame powder painted
- Air Requirements - 60 p.s.i.
- Motor - 230/460V-3Ph. 60HZ. HP based on
speed and length requirements
- Capacity - Maximum load 50 lbs. per foot.
Maximum unit load 100 lbs.
|
|
The Model SC is designed to function as a belt driven
sortation conveyor. The belt concept provides a reliable
method of tracking packages to the divert stations. The
diverter may be controlled by photo cells, a code
reader, a PLC controller, or other established control
methods.
|
|
Model
SC
High Speed
Sortation
|
View
Sheet
|
Download
Sheet
|
- Overall Widths: 26", 32", 38", & 44"
- Bed - 14" deep x 1-1/2", 10 & 12 ga.
formed steel frame powder painted
- Air Requirements - 60 p.s.i.
- Motor - 230/460V-3Ph. 60HZ. HP based on
speed and length requirements
- Capacity - Maximum load 25 lbs. per foot.
Maximum unit load 50 lbs.
|
|
Diverter Specifications
- Diverter consists of four rows of 3-1/8" dia.
wheels driven by urethane belts, slave driven from
conveyor (pivoted pneumatically)
- Capacity - Maximum unit package weight; 75 lbs.
- Package Size-minimum 6" wide x 9" long to maximum
18" wide x 30" long
- Air Requirements - 60 p.s.i. minimum to 125 p.s.i.
maximum
|
|
 |
Y Switch provides simple method of
diverting or converging products from one line to
another. Normal flow is to right curve looking from
handle end. Transfer mechanism is raised to transfer
products to other curve. Unit mounts on three stationary
products. Furnished with manual or pneumatic controls.
Guard rails can be supplied -
optional. |
|
| Spur Curve Switch |
 |
Y Switch provides simple method of
diverting or converging products from one line to
another. Normal flow is to right curve looking from
handle end. Transfer mechanism is raised to transfer
products to other curve. Unit mounts on three stationary
products. Furnished with manual or pneumatic controls.
Guard rails can be supplied -
optional. |
|
| TC-250 Traffic Cop |
|
The traffic cop controls product flow from
one conveyor onto another. It allows products from one
line of traffic to flow freely, without interference
from another converging line of traffic. This eliminates
collision of products which may cause damage and disrupt
product flow.
View Video |
|
| Linear Thruster Package Stop
|
| The Linear Thruster Package Stop is highly efficient and
can be adapted to most any Hytrol powered roller or gravity
conveyor. |
 |
The traffic cop controls product flow from
one conveyor onto another. It allows products from one
line of traffic to flow freely, without interference
from another converging line of traffic. This eliminates
collision of products which may cause damage and disrupt
product flow. |
|
 |
The HSP provides high speed automatic
product diversion. Product may be diverted 90° onto
another conveyor, chute, etc. Special two-valve
pneumatic control system provides smoother operation at
speeds up to 45 cycles per minute. Cycle time varies
with weight of product and
stroke. |
|
| Overhead Push-off |
 |
The Overhead Push-off provides high
speed automatic product diversion. Product may be
diverted 90° onto another conveyor, chute, etc. or
changed from one lane to another in parallel lines.
Overhead design conserves space next to conveyor. |
|
| Single Powered Pivot Diverter
|
 |
The Powered pivot diverter is designed for
use with models 138-ACC & 190-ACC accumulating
conveyor. Products are automatically diverted onto
adjacent 30° spur lines. |
|
 |
The double powered pivot diverter is
designed for use with models 138-ACC & 190-ACC
accumulating conveyor. Products are automatically
diverted onto adjacent 30° spur lines. |
|
 |
O-Ring transfers are used to move products
at right angles to adjacent or parallel conveyor lines.
An air bag lifts the transfer mechanism while powered
O-Rings transfer the product. Linear bearings are used
to guide transfer as it is raised and lowered. Can be
used with models 138 and 190-SP/SPEZ line shaft
conveyors. |
|
| Reversing
O-Ring Transfer (BR Type)
|
 |
Reversing O-Ring Transfers are used to
move products at right angles to adjacent or parallel
conveyor lines. An air bag lifts the transfer mechanism
while powered O-Rings transfer the product. Linear
bearings are used to guide transfer as it is raised and
lowered. Air cylinders operate reversing mechanism to
reverse transfer flow. Can be used with models 138 and
190SP/SPEZ line shaft
conveyors. |
|
| CT-200 |
 |
Chain Transfers are used to move
products at right angles to adjacent or parallel
conveyor lines. One air cylinder lifts the transfer
mechanism while powered chains transfer the product.
Chains run on UHMW polyethylene wearstrips to reduce
friction. Complete unit mounts in models 190-ABEZ,
190-ACZ or 190-LR. |
|
| 35 Roller
Transfer |
 |
The 35 Roller Transfer is used to transfer
product from one pallet handling conveyor to another.
There are many combinations and applications. The 35RT
uses 3-1/2" dia. x 9 ga. rollers mounted on 6" centers.
Air bags lift the transfer mechanism. The 35RT uses a
1/2 HP Eurodrive gear motor to provide constant 30
FPM. |
|
| 26-CRPT Power Rotated
Turntable |
 |
The 26CRPT is used to rotate products up
to 360 degrees. The turntable is powered by a shaft
mounted gearmotor complete with variable speed
controller for soft start/stop and has proximity
switches mounted on base to sense position and control
rotation of product. An 8-wire collector ring allows
unlimited rotation of turntable. Powered transition
rollers, mounted on apron of turntable deck, help move
product onto and off of
turntable. |
|
| Chain Transfer (BR, CC,
& Extended Types) |
View
Catalog Sheet |
Download
Catalog
Sheet |
| Chain transfers are used to move products at right
angles to adjacent or parallel conveyor lines. Air bags
lift the transfer mechanism while powered chains
transfer the product. Two or three strands of chain are
available in either between rail (BR), conveyor to
conveyor (CC), or Extended types. Chains run on UHMW
polyethylene wearstrips to reduce friction. Can be used
with models 25-CRR or 2511-CRA chain driven roller
conveyors. |
|
|
 |
Sortation Systems
