| Turntables &
Plows
|
 View
Catalog Sheet
|
Download
Catalog
Sheet
|
| Powered Turntable
|
|
The powered turntable is used when two parallel
conveyor lines must be close together with a 180º turn
at one (or both) ends. The turning radius is held to a
minimum, less than would be available with gravity or
powered curve sections. Turntable plow and guard rails
insure product safety while negotiating 180º turn. Unit
is reversible and all bearings are sealed. Table top
speed at drive wheel is 190 FPM.
|
|
| Manually Operated Turntable
|
|
The Manually operated turntable can be
placed in-line with gravity or powered conveyors.
Operator can manually reposition turntable to divert
pallets, product, etc. to an adjacent conveyor line.
Minimum elevation to top of rollers is 8-1/2 in. Other
elevations up to 40 in. available.
|
|
| Plows - 30-MP (Manual) & 30-AP
(Pneumatic)
|
|
30º plows are used to divert product from
main conveyor line to spur line. Mounts to underside of
bed on powered belt or live roller type
conveyors.
|
|
| 35 Roller Transfer &
26-CRPT Power Rotated Turntable
|
View
Catalog Sheet
|
Download
Catalog
Sheet
|
| 35 Roller
Transfer
|
|
The 35 Roller Transfer is used to transfer
product from one pallet handling conveyor to another.
There are many combinations and applications. The 35RT
uses 3-1/2" dia. x 9 ga. rollers mounted on 6" centers.
Air bags lift the transfer mechanism. The 35RT uses a
1/2 HP Eurodrive gear motor to provide constant 30
FPM.
|
|
| 26-CRPT Power Rotated
Turntable
|
|
The 26CRPT is used to rotate products up
to 360 degrees. The turntable is powered by a shaft
mounted gearmotor complete with variable speed
controller for soft start/stop and has proximity
switches mounted on base to sense position and control
rotation of product. An 8-wire collector ring allows
unlimited rotation of turntable. Powered transition
rollers, mounted on apron of turntable deck, help move
product onto and off of
turntable.
|
|
|
 |
Turntables
& Plows