A. Tripod stands.
B. Portable castered supports.
C. Stationary floor supports.
D. Polytier supports.
E. Ceiling hangers.
F. Under trussing.
Tripod Stands are used for temporary
installations. It consists of a "T" shape upper top
which fits under the cross brace of wheel conveyor or SSR/SAR
roller conveyor. The bottom part of the "T" slips into a
3-legged tripod and is held in the height position by a friction
grip.
Portable castered supports utilizes the "T"
portion of the tripod stand which slips into a vertical pipe with
a flat cross piece at the bottom to which are attached casters for
portability.
Stationary/Floor supports consists of two pivot plates
attached to the underside of the conveyor section, to which are
attached formed steel channel legs. Adjustable feet are attached
to the bottom of the legs. The feet are provided with holes for
fastening the support to the floor. Stationary floor supports may
also be fitted with castered supports.
Polytier supports are designed to provide sturdy supports
for multi-level conveyor lines, utilizing formed steel channel
uprights with 1 1/2 inch diameter pipe cross braces to which the
conveyor lines are attached with "U" shaped brackets.
Knee braces, which are angled between the upright leg and the
underside of the conveyor frame, provide increased longitudinal
rigidity.
Ceiling hangers consist of 5/8 inch diameter painted steel
rods fastened to the 1 1/2 inch diameter cross pipe mounts on the
underside of the bed sections and the upper portion is fastened
either to ceiling beams or metal clips which in turn are fastened
to ceiling beams.
NEXT>>
