|
Knife-Edge
Flomaster's innovative
Knife-Edge® Belt Power Turns use an innovative design concept to allow the ultimate
transfer of small, lightweight products around curves from 30 to 180 degrees.A fixed position end roll, 5/8" (15.9mm) diameter, allows
reliable transfer and exact alignment of a wide variety of items at speeds up to 100fpm
(.5 meters/sec.). These units can handle load capacities up to 15 lbs./ft. (22.3
kg/meter).
 |
Designed specifically to eliminate expensive accessories normally used
to effect transfers, the Knife-Edge Belt Power Turn carries Flomaster's reputation for
dependability and reliability into new applications. |
All Knife-Edge Belt Power Turns have the
following features:
- Large range of arcs
- Small fixed position end rolls, 5/8" (15.9mm) diameter
- Positive chain driven belt - no slippage from contaminants on
the belt
- All steel construction
- FDA acceptable food grade belting is standard; static
conductive belting is available
- Produced by the world's largest supplier of belt power turns
|
